User's Manual

M1KPNAV Navigator Touchscreen Keypad - User Guide
Page 17
Automation - Keypad Temperature
If your M1 system was installed with any M1KP Keypads you can use this
option to view the temperature of their internal temperature sensor.
Consult your Installer to see if your
system includes any M1KP Keypads.
This screen displays
all active Keypads
using a darker highlight on those
buttons. Just be aware that only M1KP
model Keypads contain a viewable
temperature sensor.
The Previous and Next buttons skip
between active Keypads.
To return to the Main Menu press the
Menu button. To return completely back to the Main screen press the red
close button on the top right of the screen.
Automation - Thermostat Temperature
If your M1 system was integrated with any intelligent communicating
thermostats attached to your HVAC system, the current temperature reading
on those may be viewed by pressing the corresponding numbered button.
This screen displays all active
Thermostats using a darker highlight
on those buttons. Consult your
Installer if you aren’t sure if your
system has any communicating
Thermostats, or aren’t sure which
numbers correspond to an attached
Thermostat.
The Previous and Next buttons skip
between active Thermostat(s).
To return to the Main Menu press the
Menu button. To return completely back to the Main screen press the red
close button on the top right of the screen.