User's Manual

M1KPNAV Navigator Touchscreen Keypad - User Guide
Page 18
If your M1 system includes Smoke Detectors (optional) wired to the control,
these generally have a visual LED light that will illuminate whenever the
detector has activated. This is useful for troubleshooting and locating the
source of an alarm after a false or
accidental trip.
The Reset Smoke Detectors button
provides the means to reset (clear) the
visual indicators by removing power
from the detectors for 5 seconds.
To return to the Main Menu press Menu.
To return completely back to the Main
screen press the red close button on
the top right of the screen.
Reset Smoke Detectors
Walk Test Area
It is recommended that you completely test your Security System on a weekly
basis. Refer to System Testing explained later in this User Guide.
Navigator provides a quick and easy means of walk testing zones without
distrurbing your neighbors. This Walk Test option DOES NOT cause any
alarm or trouble reports to be transmitted to a Central Station.
To return to the Main Menu Menu. To return completely back to the Main
screen press the red close button on the top right of the screen.