User's Manual

M1KPNAV Navigator Touchscreen Keypad - User Guide
Page 21
This manual does not go into detail on the Systems Settings options. Many
are self-explanatory, while others are intended for use ONLY by the Installer.
Consult the installer if you have any questions or need more information.
Set System Clock - Time is entered
in 24hr format. Use the numeric keys
for data entry and the “Set ..” keys for
choosing the entry position.
Adjust Volume - This permits volume
adjustment of the speaker for “Non-
Alarm” messages ONLY. The volume
range is 0 to 7.
Keypad Adjustments - This permits the
Beep Tone, Beep Volume, and Backlight (inactive) level to be adjusted.
System Test - PRIMARILY FOR INSTALLER USE ONLY!
Download Control - PRIMARILY FOR INSTALLER USE ONLY! This option
should not be used except under the direction of the Installer!
System Diagnostics - PRIMARILY FOR INSTALLER USE ONLY!
Custom Voice Message Record - PRIMARILY FOR INSTALLER USE ONLY!
This option should only be used under the guidance and direction of the
Installer!
Installation Programming
* Not applicable to the User * This option requires entry of the Installer
Level Program Code.
(A Master or Installer Code is required for these options)
System Settings