User's Manual

M1KPNAV Navigator Touchscreen Keypad - User Guide
Page 6
STAY - Arming in the “Stay” Mode
Stay mode arming is used when the premises is occupied. All perimeter
doors and windows are armed, and all interior zones are excluded.
1. Enter a User code or press the STAY key (Quickarm). **
2. Display will change to Armed Stay. Exit tone is silent during Stay arming.
3. All interior zones will be excluded in the Stay mode.
Exit and Entry zones will still have their respective delay times.
** Additional presses of the Stay key (while the exit delay is still active) may be
allowed to switch to alternate modes of Stay. In some instances this may be
allowed even while the system is armed.
Armed Stay Instant = Deletes the Entry Delay on entry/exit zones.
Armed Night = Adds protective zones designated as Night Zones.
Armed Night Instant = Adds the Night zones AND deletes Entry Delay.
** Auto Stay Arming
There is an option which allows the system to automatically switch from Away
mode to Stay mode when no perimeter delayed doors are opened during the exit
delay countdown time. Essentially, this auto stay option makes sure the alarm is
armed in the stay mode if there is no detection of anyone leaving the building.
** These options must be enabled by the Installer.
F Keys - Special Function Keys
There are 6 special function “F” keys which your Installer may enable for
purposes as emergency panic alarm, automation event triggers (lights,
outputs), and more. F1 and F2 are on the Main screen. Pressing “Display
F=Keys” will present all 6 “F” keys together on an extended main screen.
Each individual key may be programmed to allow activation via a single
press, or to require double press (2 quick presses in a row). Double press
helps prevent accidental activation. If a key is set to require double press
the screen will display “Press F_ Again To Activate” immediately after the
first press. This times out after ~8 seconds if no 2nd press occurs.
F1 FIRE - If enabled by the Installer this key will trip a fire alarm panic. An
Alarm Monitoring center can be contacted if you subscribed to monitoring.
F2 POLICE - If enabled by the Installer this key will trip a police panic alarm.
The Installer can enable this to either be silent or audible. An Alarm
Monitoring center can also be contacted IF you subscribed to monitoring.