Installation manual

Page 14 M1XRFTW Installation Manual
After the first M1XRFTW Transceiver has been installed at address 2, up to 3 additional units may be installed for redundancy or
improved coverage and range. Each addtional unit will require its own data bus address and must be enrolled into the control.
IMPORTANT NOTE: There can be no more than 4 total ELK-M1XRFTW Transceivers connected to the M1
Control.
Offices
M1XRFTW
Warehouse Production Sales
EXAMPLE OF LARGE COMMERCIAL BUILDING with the maximum of 4 M1XRFTW Transceivers
Shipping
M1XRFTW
M1XRFTWM1XRFTW
Appendix C - Installing Multiple Redundant M1XRFTW Transceivers