Installation

1000001943 (Rev. C - 03/19)

For Technical Service, please contact us at 1.800.476.4106

Elkay - www.elkay.com

Halsey Taylor - www.halseytaylor.com

FRAME

5/16" SCREWS OR BOLTS

(10 REQ'D - NOT FURNISHED)

INSTALL (2) SCREWS

(P/N 111008343890) IN FRAME

BEFORE INSTALLING IN OPENING

18 3/4"

476mm

31 3/4"

806mm

76mm

25"

635mm

MFWSF100 / MFWSF120 MOUNTING FRAME INSTRUCTIONS

MFWSF100

MFWSF120

INSTALL (2) SCREWS

(P/N: 111008343890 - PROVIDED)

BEFORE INSTALLING IN OPENING

5/16" SCREWS OR BOLTS

(10 REQ'D - NOT FURNISHED)

FRAME

OUTLET BOX

GROUND SCREW LOCATION

PAGE 1
MFWSF100 / MFWSF120 MOUNTING FRAME INSTRUCTIONS GROUND SCREW LOCATION OUTLET BOX MFWSF120 3" 76mm 5/16" SCREWS OR BOLTS 5/16" SCREWS OR BOLTS (10 REQ'D - NOT (10 FURNISHED) REQ'D - NOT FURNISHED) 31 3/4" 806mm FRAME FRAME (2) SCREWS INSTALL (2)INSTALL SCREWS (P/N: 111008343890 - PROVIDED) (P/N 111008343890) IN FRAME BEFORE INSTALLING IN OPENING BEFORE INSTALLING IN OPENING 18 3/4" 476mm 25" 635mm MFWSF100 For Technical Service, please contact us at 1.800.476.4106 Elkay - www.elkay.
PAGE 2
MFWSF100 / MFWSF120 MOUNTING FRAME INSTRUCTIONS 1. Cut a square rectangular wall opening 18 3/4” (476mm) W x 31 3/4” (806mm) H and 25” (635mm) above the floor line. These dimensions are required to obtain proper rim and bubbler heights for compliance with ANSI standard A117.1. 2. Reinforce the wall opening on all sides so that it will adequately support the water fountain. This reinforcement must support up to 150 lbs static load and provide a means for securing the frame assembly in place. 3.