Project Ideas

6
FAQ
Iron-on
• Adhere with an iron to the wrong
side of the fabric.
• Nonwoven type: Remove the non-
woven type after the embroidery.
• Woven type: Use the woven type if it is
not necessary to remove the stabilizer.
Water-soluble stabilizer
• Use water-soluble when you do not
want to leave the stabilizer. Prepare
a washable fabric. Wash the fabric
once after embroidery.
Water-soluble topping
• A water-soluble topping is not a
stabilizer.
• Place the water-soluble topping on
the fabric when embroider towel,
microfiber or fake fur fabrics.
Q3-12
How should I use a stabilizer?
A3-12
To create the best quality embroidery,
attach a stabilizer to the wrong side of
the fine fabric.
Stabilizer usage varies depending on
the fabric.
Refer to the following chart.
*To attach an iron-
on stabilizer, refer
to the stabilizer
manual.
**Attaching stabi-
lizers to a towel
or microfiber may
damage the fabrics
when removing.
Hooping fabric is
recommended for
towel and microfi-
ber fabrics.
USING STABILIZERS
TOPPING