Project Ideas

7
FAQ
Draw a horizontal line on the fabric
where the center of the design will be.
Align the horizontal line on the fabric
with the horizontal line on the template
sheet, and mark the end points for a ver-
tical line. Connect the points to draw the
vertical line.
A water-erasable marker
works best.
Match the center lines of the
fabric and the center lines of the template
sheet, and attach the fabric to the hoop.
Q4 OTHER FAQ
Q4-1
I want better looking finish on the rear
side of the embroidery design.
A4-1
Use the same thread for the needle and
bobbin threads.
Q4-2
Will there be any more designs with
this machine?
A4-2
New designs are added from time to time.
Check back frequently for the latest!
Q4-3
How should I adjust the position of the
hoop?
A4-3
Press the jog buttons on top of the
machine to adjust the position of the hoop.
Q4-4
How long does it take to finish an
embroidery design?
A4-4
The embroidery machine sews 1000
stitches in 3 to 4 minutes. (The time for
changing thread is not included.)
Q4-5
How can I combine the embroidery
designs to make a larger design?
A4-5
You can connect embroidery designs by
using a template and template sheets.
Example: How to Connect the Border
Designs Horizontally
Print out the template sheet from the
on-line help. Cut the template sheet to
the size of the design.
Print the template sheet at
“Actual size”. Use a semi-opaque
paper for the template sheet.