Technical information

30
MAXIMUM EFFICIENCY IN HEAT
STORAGE
ELNUR offers two main ranges of storage heaters: Dynamic and Static.
Both versions store heat internally in high density ceramic blocks, but release it in different ways. They also offer different
advantages adapted to the needs of the end user.
Dynamic (fan assisted) storage heaters release the hot air using controlled convection with a silent fan that makes the air
circulate inside the bricks, heating it and then releasing it into the room through the grille located at the bottom of the
machine. This controlled convection allows the user to manage the temperature of the room and the heat release time.
Static storage heaters release heat by natural convection in two different ways. There is a primary convection controlled
by a top ap that releases hot air after the storage heater is charged.
But there is also a natural secondary convection that releases hot air 24 hours a day. This air is heated when it passes
through the air chambers of the storage heater and is released through the top grille and the front and rear apertures.
This natural secondary convection is generated by the design of the machine allowing a constant release of heat without
leading to additional energy costs. Storage heater only consumes energy during off-peak hours at night.
The high level of ef ciency of GABARRÓN ranges of storage heaters can be seen in the following thermographies thermal
images obtained as a part of some of the tests carried out on the products.
In these images we see the evolution of the surface temperature (the equivalence of these temperatures and the colours
appear in the column on the left.
DYNAMIC STORAGE HEATER
(fan-assisted) convection
Floor isolation.
Hot air flow out. Grill.
Hot/cold air mixer. Includes a discharge security thermostat.
Air flow inside the heating core.
Accumulation core.
Heating elements.
Front insulation.
Upper insulation.
Rear insulation.
Lower insulation.
Cold air flow in.
Convection fan.
Control Thermostat bulb sensor.
Manual reset safety cut-off bulb sensor.
Discharge manual reset safety cut-off.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
STORAGE HEATERS
1
15
2
3
4
5
6
7
14
9
10
11
12
8
13