Technical information

33
HEAT STORAGE BLOCKS
The energy storage blocks represent another essential part in the construction of these devices. From the different existing
options on the market, we have selected one material, magnetite, which offers the highest density and heat storage
capacity.
This material prevents the blocks from breaking at high temperatures and provides greater heat concentration, therefore
prolonging the release of heat for longer and guaranteeing a comfortable heat for more hours during the day.
The higher the density, the higher the capacity for offering hours of heat our devices offer real heat 24 hours a day.
In this actual image of the inside of a GABARRÓN storage heater we can see most of the above referred materials and
their position inside the heater.
Section of a SHM
Storage Heater
Vermiculite insulation.
Automatic damper control.
Bimetal regulator.
Charging thermostat.
Charging sensor phial.
Lateral insulation of ecological fibre.
Rear air chamber.
Rear 10 mm Microtherm G insulation.
Heating Elements.
Lower vermiculite insulation.
High density magnetite refractory.
Safety thermostat.
Front 10 mm Microtherm G insulation.
Front air chamber.
Side air chamber.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15