Technical information

45
Lower energy consumption = savings at the end of the month = greater sustainability
Lti
ECOMBI
ECOMBI includes an automatic charge adjustment. The temperature is continuously managed and the consumption
assessed every day by the ESICC module. ESICC will defi ne and adapt the charging and consumption during the off-
peak charging period, taking into account the temperature needs established by the user in the room.
Another of the major benefi ts of the ECOMBI system is that, in the case of a sharp change in temperature or unexpected
heat loss in the room, it can provide additional heat using a back-up heater.
The innovative ECOMBI System can reduce energy consumption by 35%.
When you use Dynamic or Static Storage Heaters on warmer days, you might fi nd that the room is too warm and the
desired comfort level is lost. This excess heat will be noted during the middle of the day, precisely when the temperatures
are usually highest in a 24 hour day.
The innovative ESICC control module of the ECOMBI system automatically adjusts the charging, by assessing previous
consumption and adapting to your desired temperatures. ECOMBI provides maximum savings in energy consumption.
Figure 2 Figure 3Figure 1
Off Peak charging period
Energy charging / consumption
Release period
Heat release
24h.
23h.
6h.
7h.
12h.
18h.
23h.
7h.
24h.
6h.
12h.
18h.
23h.
7h.
24h.
6h.
12h.
18h.
ECOMBI is programmed to store only the required energy to maintain a set up temperature in a room. It may
be necessary to have extra heat in the release period, for a short time, to maintain the room set up temperature.
(Figure 1). In this case during the next Off Peak charging period the energy load would increase. (Figure 2). But
if extra heat is not necessary then ECOMBI will reduce the load in the next Off Peak charging period (Figure 3).
By using ECOMBI System, savings can be increased by 35%.