User manual

Static Transfer Switch

UNB

User Manual

Page 2 (28)

Notes on this manual

ATTENTION! Read this manual very carefully before installing and commissioning the specified module.

This manual is a part of the delivered module. Familiarity with the contents of this manual is required for installing

and operating the specified module.

The rules for prevention of accidents for the specific country and the general safety rules in accordance with IEC

364 must be observed.

The function description in this manual corresponds to the date of publishing.

Technical changes and changes in form and content can be made at any time by the manufacturer without notice.

There are no obligations to update the manual continually.

The module is manufactured in accordance with applicable DIN and VDE standards such as VDE 0106 (part 100) and

VDE 0100 (part 410). The CE marking on the module confirms compliance with EU standards 2006-95-EG (low volt-

age) and 2004-108-EG (electromagnetic compatibility) if the installation and operation instructions are followed.

Supplier:



ELTEK VALERE DEUTSCHLAND GmbH

GB Industrial

Schillerstraße 16

D-32052 Herford



+ 49 (0) 5221 1708-210

FAX + 49 (0) 5221 1708-222

Email Info.industrial@eltekvalere.com

Internet http://www.eltekvalere.com

Changes and errors excepted.