Installation guide

Symmetrix Fibre Channel with Qlogic HBAs on Linux Hosts

Fabric Configurations

Figure 3 SCSI Support Menu

Select SCSI support as static (* or y).

Under

---SCSI support type (disk, tape, CD-ROM)

select the options SCSI disk support and SCSI generic support

as static (* or y).

Under

---Some SCSI devices (e.g. CD jukebox) support multiple LUNs

select Probe all LUNs on each SCSI device as static (* or y).

The qlogicfc driver must be disabled in the kernel to eliminate any

possible conflicts between the qlogicfc and qla2x00(smp) drivers.

Under

SCSI low-level drivers

deselect QLogic ISP FC SCSI support.

deselect Qlogic QLA 2x00 FC SCSI support.

If Method Two was used to incorporate the QLogic driver into the kernel

(refer to Installation Methods on page 45), you must select the QLogic

driver in menuconfig as static or modular.