Instructions / Assembly

● Plug in power plug properly. Otherwise, it may cause electric shock or fire due to excess heat
generation.
● Do not operate or stop the unit by inserting or pulling out the power plug. It may cause electric
shock or fire due to heat generation.
● Do not damage or use an unspecified power cord. It may cause electric shock or fire. If the power
cord is damaged, it must be replaced by the manufacturer or an authorised service centre or a
similarly qualified per son in order to avoid a hazard.
● Always install circuit Do not direct airflow at room occupants only. breaker and a dedicated power
circuit.
● Incorrect installation may cause fire and electric shock.
● Do not operate with wet hands or in damp environment. It may cause electric shock.
● Do not direct airflow at room occupants only.This could damage your health.
● Always ensure effective grounding.Incorrect grounding may cause electric shock.
● Do not allow water to run into electric parts.It may cause failure of machine or electric shock.
● Do not modify power cord length or share the outlet with other appliances. It may cause electric
shock or fire due to heat generation.
● Unplug the unit if strange sounds, smell, or smoke comes from it. It may cause fire and electric
shock.
● Do not use the socket if it is loose or damaged. It may cause fire and electric shock.
● Do not open the unit during operation. It may cause electric shock.
● Keep firearms away. It may cause fire.
● Do not use the power cord close to heating appliances. It may cause fire and electric shock.
● Do not use the power cord near flammable gas or combustibles, such as gasoline, benzene,
thinner, etc. It may cause an explosion or fire.
● Ventilate room before operating air conditioner if there is a gas leakage from another appliance. It
may cause explosion, fire and, burns.
● Do not disassemble or modify unit. It may cause failure and electric shock.