Warranty

55 66
Dehumidifying operation
In the Dehumidifying mode, you can not switch the
fan speed. It has already been automatically
controlled.
NOTE
Ensure the unit is plugged in and power is
available.
1.
Press the MODE button to select Dry.
3. Press the TEMP UP/DOWN button to
set the desired temperature.
Press the ON/OFFbutton to start the air
conditioner.
2.
Cooling /Heating/ operationFan
Ensure the unit is plugged in and power is
available.
1.
Press the MODE button to select Cool, Heat
(cooling&heating models only) or mode.
3. Press the TEMP UP/DOWN button to set the
desired temperature.
4. Press the FAN button to select the fan
speed.
Press the ON/OFF button to start the air
conditioner.
2.
Fan
How to use the buttons
Auto operation
Ensure the unit is plugged in and power is
available.
1.
Press the MODE button to select Auto.
3. Press the TEMP UP/DOWN button to set
the desired temperature.
Press the ON/OFFbutton to start the air
conditioner.
2.
3
4
2
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and
by sensing the difference between the actual
ambient room temperature and the set temperature
on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE
1
3
3
2
1
3
3
2
1
3
In the Fan mode, you are not able to control the
room temperature either. In this case, only step 1, 2
and 4 may be performed.
NOTE