Installation guide

Quick Installation Guide
00825-0100-4648, Rev CC
February 2012
Rosemount 648 Wireless
7
Field Communicator
To verify operation using a Field Communicator, refer to the Fast Key Sequence in Table 1.
Select the Radio State parameter to verify operation. For connecting to a Field
Communicator, refer to Figure 3: Connection Diagram on page 4.
Table 1. 648 Fast Key Sequence
Smart Wireless Gateway
In the integrated web interface from the Gateway, navigate to the Explorer>Status page.
This page shows whether the device has joined the network and if it is communicating
properly.
NOTE:
It may take several minutes for the device to join the network.
NOTE:
If the device joins the network and immediately has an alarm present, it is likely due
to sensor configuration. Check the sensor wiring (see Rosemount 648 Terminal
Diagram on page 9) and the sensor configuration (see 648 Fast Key Sequence on
page 9).
Figure 4. Smart Wireless Gateway Network Settings
Searching for Network Joining Network Connected with
1 Parent
Connected with
2 Parents
Function Key Sequence Menu Items
Network 1, 3, 3 Smart Power, Network ID, Set Join Key, Radio
State
n e t w k
A - s r c h
n e t w k
J O I N G
n e t w k
1 P A R N T
n e t w k
2 P A R N T
00825-0100-4648_CC.fm Page 7 Monday, February 13, 2012 12:48 PM