Instructions / Assembly

emersonfans.com

Please contact 1-800-654-3545 for further assistance

U.L. Model No.: 52-ANT

5. How to Wire Your Ceiling Fan (Continued)

CEILING COVER

LOCKWASHERS (2)

THREADED STUDS (2)

KNURLED KNOBS (2)

Figure 21

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the outlet box and

not pinched between the ceiling cover and the ceiling.

WARNING

5.6

Lift the ceiling cover up to the threaded studs and turn

until studs protrude through the holes in the ceiling

cover (Figure 21).

5.7

Secure the ceiling cover in place by sliding lockwashers

over the threaded studs and installing the two knurled

knobs (supplied). (Figure 21).

Tighten the knurled knobs securely until the ceiling

cover fits snugly against the ceiling and the hole in the

ceiling cover is clear of the downrod.

5.5

crew the two threaded studs (supplied) into the

tapped holes in the hanger bracket (Figure 20).

THREADED

STUDS (2)

Figure 20

BP7312-4 CF700.qxp_ BP7312 2/27/15 5:14 PM Page 15