Manualshelf

Instructions / Assembly

ManualsBrandsEmerson ManualsCeiling FansLuray Eco 60 in. Platinum Ceiling Fan
11121314151617181920
11
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF860
4. How to Hang Your Ceiling Fan (Continued)
To avoid possible fire or shock, do not pinch wires
between the hanger ball/downrod assembly and
hanger bracket.
WARNING
!
Fa
ilur
e t
o se
a
t the
a
nt
i-
r
ot
a
tion tab into t
he
hangerball
gro
o
ve co
u
ld cau
se d
amage to electrical w
ires and
poss
ible shock
or f
ir
e
ha
z
ard.
WARNING
!
OUTLET
BOX
HANGER
BRACKET
HANGER BALL/
DOWNROD
ASSEMBLY
NOTE: CEILING COVER, SUPPLY WIRES AND FAN WIRES
OMITTED FOR CLARITY.
HANGER BRACKET
HANGER BALL
HANGER BALL
GROOVE
ANTI-ROTATION
TAB
Figure 16
4.3
Carefully lift the partially assembled ceiling fan and seat
the hanger ball/downrod assembly into the hanger bracket
that was just attached to the outlet box (Figure 16).
Be sure the groove in the ball is engaged with the anti-
rotation tab on the hanger bracket (Figure 16).
NOTE: Be very careful not to bend the blade
assemblies while hanging the partially assembled
ceiling fan.
The outlet box and joist must be securely mounted and
capable of supporting at least 50 lbs. Use only a U.L.
o
utlet box listed as “Acceptable for Fan Support of
22.7 kg. (50 lbs.) or less”.
WARNING
!
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked “Acceptable for
Fan Support of 22.7 kg. (50 lbs.) or less”, and use
screws supplied with outlet box. Most outlet boxes
commonly used for support of light fixtures are not
acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
WARNING
!
4.2
Securely attach the hanger bracket to the outlet box
using the two screws supplied with the outlet box.
(Figure 15).
Hanger bracket must seat firmly against outlet box. If
the outlet box is recessed, remove wall board until
bracket contacts box. If bracket and/or outlet box are
not securely attached, the fan could wobble or fall.
WARNING
!
TWO SCREWS
SUPPLIED WITH
OUTLET BOX
HANGER BRACKET
ANTI-ROTATION TAB
OUTLET BOX
Figure 15