Instructions / Assembly

17
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF860
7. How to Wire Your Ceiling Fan (Continued)
CEILING
COVER
LOCKWASHERS (2)
THREADED
STUDS (2)
KNURLED
KNOBS (2)
Figure 30
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
WARNING
!
7.6
Lift the ceiling cover up to the threaded studs and turn
until studs protrude through the holes in the ceiling
cover (Figure 30).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied). (Figure 30).
Tighten the knurled knobs securely until the ceiling
cover fits snugly against the ceiling and the hole in the
ceiling cover is clear of the downrod.
7.5
Screw the two threaded studs (supplied) into the
tapped holes in the hanger bracket (Figure 29).
THREADED
STUDS (2)
Figure 29