Instructions / Assembly

24
ETL Model No.: CF860
Your wall control has full control of your fan and light
(Figure 37).
NOTE: Prior to operation of the fan and light from
the wall control, set the fan speed to HIGH (
....
) and
turn the light ON ( ).
10.1
To set the desired fan speed, press the ( ) button to
decrease the speed and the ( ) to increase the speed.
The LED display will light up to indicate the new speed
selected.
To turn the light on and off, press and release the
LIGHT ( ) button. To set the light intensity, press and
hold the LIGHT ( ) button. The light will turn on at the
light intensity previously selected (Figure 37).
If airflow is desired in the opposite direction, press the
( ) button on the wall control. The fan must be
operating at any speed for the reverse button to
function. The blades will turn in the opposite direction
and reverse the airflow.
Your wall control comes complete with your choice of
three wall cover plates; ivory, white and light almond
(Figure 37).
Your fan is now wired to be turned on and off from the
fan switch.
Fan installation must be completed, including the
installation of the fan blades, before testing the wall
control.
WARNING
!
AIRFLOW
D
IRECTION
POWER
BUTTON
P
OWER
INDICATOR
L
IGHT
FAN SPEED
BUTTONS
ON/OFF SWITCH
O = OFF / Ñ = ON
L
IGHT
I
NTENSITY
B
UTTON
IVORY
COVER PLATE
WHITE
COVER PLATE
LIGHT ALMOND
COVER PLATE
Figure 37
10. Using Your Ceiling Fan