Instructions / Assembly

28
ETL Model No.: CF860
15. Light Kit LED Driver Replacement (Continued)
CEILING
COVER
L
OCKWASHERS (2)
THREADED
STUDS (2)
KNURLED
KNOBS (2)
Figure 41
15.2
Remove the two knurled knobs and lockwashers from
t
he threaded studs. Retain the hardware for future
reinstallation (Figure 41).
S
lide the ceiling cover downward to rest on top the
motor housing.
SUPPLY &
FAN BLACK
WIRES
LISTED WIRE
CONNECTOR
SUPPLY & FAN
WHITE WIRES
SUPPLY, HANGER BRACKET, &
HANGER BALL GREEN WIRES
Figure 42
15.3
Removal of the Ceiling Fan Wires, See Section 7,
Reverse Steps 7.4 through 7.1.
Disconnect the wire connector from the fan motor black
wire and supply black wire (Figure 42)
Disconnect the wire connector from the fan motor white
wire and the supply white wire (Figure 42).
Disconnect the wire connector from the hanger ball,
hanger bracket and supply green wires (Figure 42).
Retain all hardware for future reinstallation.
OUTLET
BOX
HANGER
BRACKET
HANGER BALL/
DOWNROD
ASSEMBLY
NOTE: SUPPLY WIRES AND FAN WIRES OMITTED FOR CLARITY.
Figure 43
15.4
Carefully remove the ceiling fan (hangerball/downrod)
from the hanger bracket (Figure 43).
Place the ceiling fan, downrod facing up, onto a secure
solid surface in preparation of the driver replacement.
NOTE: Be very careful not to bend the blade
assemblies while removing the ceiling fan.