Instructions / Assembly

emersonfans.com

Please contact 1-800-654-3545 for further assistance

ETL Model No.: CF860

15. Light Kit LED Driver Replacement (Continued)

REMOVE

PHILLIPS HEAD

SETSCREWS (2)

4.5" DOWNROD

MOTOR

COUPLING

CLEVIS

HAIRPIN

CLIP

Figure 45

15.6

Remove the hairpin clip from the clevis pin. Remove the

clevis pin from the downrod (Figure 45).

Retain both the clevis pin and the hairpin clip for future

reinstallation.

Remove the two setscrews, using a Phillips head

screwdriver, from the downrod (Figure 45).

Retain both setscrews for future reinstallation.

UPPER MOTOR

COVER SCREWS (3)

UPPER MOTOR

COVER

Figure 46

15.7

Remove the three upper motor cover screws, using a

Phillips head screwdriver (Figure 46).

Retain the three screws for future reinstallation.

Slide the upper motor cover up to expose access to the

light kit driver.

UPPER MOTOR

COVER

COUPLER

COVER

Figure 44

15.5

NOTE: You may need help of an assistant to hold

he ceiling cover, coupler cover and upper motor

cover up and away from the motor housing, while

performing the following steps.

Slide the motor coupler cover up the downrod to access

the top of the motor housing (Figure 44).