Instructions / Assembly

30
ETL Model No.: CF860
15. Light Kit LED Driver Replacement (Continued)
REMOVE & RETAIN
PHILLIPS HEAD
SCREWS (2)
OLD LIGHT
KIT LED
DRIVER
MOTOR
HOUSING
Figure 48
15.9
Remove the two Phillips head screws from the Old Light
Kit LED Driver (Figure 48).
Retain the screws for future reinstallation.
Gently pull up on the Light Kit LED Driver. Remove the
Driver from the motor housing (Figure 48).
Discard the Old Light Kit LED Driver in the correct
recycle bin.
REPLACE PHILLIPS
HEAD SCREWS (2)
NEW LIGHT
KIT LED
DRIVER
MOTOR
HOUSING
Figure 49
15.10
Place the New Light Kit LED Driver into the motor
housing, aligning it directly where the Old Driver had
been (Figure 49).
Install the New Light Kit LED Driver to the motor
housing using the two screws previously removed
(Figure 49).
MOTOR DC POWER
CONNECTOR
LIGHT KIT LED DRIVER
DC POWER CONNECTOR
LIGHT KIT
LED DRIVER
LIGHT KIT LED
DRIVER AC POWER
CONNECTOR
MOTOR AC POWER
CONNECTOR
Figure 47
15.8
S
queeze and unclip the motor AC power connector from
the Light Kit LED Driver connector (Figure 47).
S
queeze and unclip the motor DC power connector
from the Light Kit LED Driver connector (Figure 47).