Instructions / Assembly

31
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF860
15. Light Kit LED Driver Replacement (Continued)
M
OTOR DC POWER
C
ONNECTOR
L
IGHT KIT LED DRIVER
D
C POWER CONNECTOR
NEW LIGHT
KIT LED
DRIVER
MOTOR AC
POWER
CONNECTOR
LIGHT KIT LED
DRIVER AC POWER
CONNECTOR
Figure 50
15.11
R
econnect the motor AC power connector to the Light
Kit LED Driver connector (Figure 50).
R
econnect the motor DC power connector to the Light
Kit LED Driver connector (Figure 50).
4.5"
DOWNROD
MOTOR
COUPLER
ALIGN DOWN ROD
HOLE WITH MOTOR
COUPLER HOLE
Figure 52
15.13
Re-seat the downrod in the motor coupler.
Rotate and align the two downrod holes with the two
holes in the motor coupler as shown in Figure 52.
15.14
Reassemble the downrod to the motor coupler by following
the Ceiling Fan Assembly, Sections 3, Steps 3.9 through
3.10.
15.15
Rehang your ceiling fan per Section 4, Step 4.2.
15.16
Rewire your ceiling fan per Section 7, Steps 7.1 through
7.6
15.17
Restore electricity and verify function of the Light Kit.
UPPER MOTOR
COVER SCREWS (3)
UPPER
MOTOR
COVER
EVERY OTHER
MOUNTING HOLE (3)
Figure 51
15.12
Replace the upper motor cover by reassembling the
three screws previously removed in Step 15.7.
Placement of the screws should be every other hole as
shown in Figure 51.