User Guide

10-8 • E2 RX/BX/CX I&O Manual 026-1610 Rev 13 14-SEP-2011
10.7.6 The System Information
Menu
The System Information Menu is another menu used to
set up the E2. The options in this menu allow setting up
time and date, passwords, toggle full options, general
information about the controller, and system administrator
functions.
To open the System Information Menu:
1. Press

2. Press  (System Configuration)
3. Press
 (System Information)
The System Information menu contains nine items:
Figure 10-13
- System Information Menu
Menu Option Description
1 - General Controller Info Edit general information about
the E2, such as engineering
units, and summer/winter
change-over specifications.
2 - Time and Date Change the current date and
time, and specify date formats.
3 - Passwords/User Access Set up usernames and pass-
words, and define security level
requirements.
4 - Firmware Revision Read-only information screen
that contains current system ver-
sion information
5 - Service Actions Set up system diagnostics (mem-
ory and execution info), and per-
form advanced functions
(system resets and firmware
update).
6 - Note Pad Writable field for technician to
make notes about changes made
or general information.
7 - Display Users Enter information about Logging
Group applications such as the
sampling frequency and total
number of samples.
8 - Toggle Full Options When set to on, FULL will
appear at the top right of the
screen and gives user full access
to options and applications.
9 - Application Default
Value Setup
Choose the default values most
appropriate to the refrigeration
control components in the sys-
tem.
Table 10-5 - System Information Menu Options