Service manual

8-8 FL10.3TR
Are the audio(L/R) signals inputted to each pin of
CN301?
Replace Digital Main CBA Unit.
No
Ye s
Audio is not outputted normally.(Component Audio input)
FLOW CHART NO.2
Are the audio(L/R) signals inputted to the Pin(4, 11)
of IC771?
Check the line between Pin(4, 11) of IC771 and input
terminal(JK741, JK742), and service it if defective.
No
Check SP801,SP802 and their periphery circuit,
and service it if defective.
Are the audio(L/R) si
gnals inputted to the Pin(1, 44)
of IC801?
Are the audio(L/R) si
gnals inputted to the Pin(3, 5)
of IC871?
Ye s
Ye s
No
No
Are the audio(L/R) signals outputte
d to the Pin(1, 2)
of CN801 and CN802?
Are the audio(L/R) signals outputte
d to the audio
output terminal?
Check IC801 an
d their periphery circuit, and
service it if defective.
CN801: SP(L)
CN802: SP(R)
JK871: AUDIO(L)-OUT
JK872: AUDIO(R)-OUT
No
Ye s
Check the line b
etween Pin(6, 8) of CN301 and
Pin(1, 44) of IC801, and
service it if defective.
Check the line b
etween Pin(2, 4) of CN301 and
Pin(3, 5) of IC871, and service it if defective.
No
Check the line between Pin(1, 7) of IC871 and audio
output terminal(JK871, JK872), and ser
vice it if
defective.
Pin(6) :
Pin(8) :
Pin(2) :
Pin(4) :
AMP(L)-OUT
AMP(R)-OUT
AUDIO(L)-OUT
AUDIO(R)-OUT