User manual

RPC BDM
™
(Optional)
Emerson
®
RPC2
™
46
5.6.2 View Branch Data
The availability of branch information depends on the capabilities of the PDU. Branch information
and PDU information are the same for rack PDU’s without branch management; that information is
seen at the PDU view level.
To view data for a branch module:
• Select a branch in the bottom left corner. The selected letter will be highlighted.
• The screen displays information for the selected branch module. The example below shows data
for Branch A, one of two branches on PDU #1 that are communicating with the RPC BDM unit.
• See Table 16 for explanations of components that appear on the screen.
Table 16 Branch view components
# Item Item Description Purpose
1
Component
Identification
Displays an icon to indicate the type of component selected—branch in
this example—as well as the branch ID, which is in the format:
PDU# - Branch#
(See 3.2 - Rack PDU Component ID for details.)
2
Power Utilization
Graph
Graphically displays the approximate power utilization of the selected
components.
3 Amperage Displays the amperage of the selected module.
4
Voltage, Power,
Apparent Power
Displays voltage, power and apparent power for the selected branch.
5 Branch ID Select a given branch to view its information.
6
i Information*
Select to view information about the selected branch. See example of
branch level information screen* below.
7 Up One Level Move up one level—in this example, from branch to PDU view.
8 On/Off status Displays an icon to indicate whether the module is On or Off .
1-A
119.6V 202W
1.98 A
237VA
i
BA
3
6
7
8
21
4
5
X
Active Event
icon
2.96 A
119.7V 203W
A B
Model: MPHM3141
S/N: 4FEB030033 MPHM3
FW Ver: 0.4.1.2
Ratings: 1P3W 120V 16A
Receptacles: 16
* Example of branch
level information
screen
View IP & MAC
address information
and firmware version
IP: 162.1.30.57
MAC ID: 00:00:84:47:31:49
RPC2 FW Ver: 7.0.0.1