Instruction manual

Instruction Manual
760006-A
September 2001
P-2 Preface Rosemount Analytical Inc. A Division of Emerson Process Management
Model NGA 2000 Platform
SAFETY SUMMARY
If this equipment is used in a manner not specified in these instructions, protective systems may be im-
paired.
DANGER.
ELECTRICAL SHOCK HAZARD
Do not operate without doors and covers secure. Servicing requires access to live parts
which can cause death or serious injury. Refer servicing to qualified personnel. For safety
and proper performance this instrument must be connected to a properly grounded three-
wire source of power. Platforms with two power supplies require disconnection of BOTH
power cords to remove power from the platform.
DANGER.
POSSIBLE EXPLOSION HAZARD
This equipment may contain modules used in the analysis of sample gases which may be
flammable. If used for analysis of such gases, the module must be protected by a continuous
dilution purge system in accordance with Standard ANSI/NFPA 496-1993, Chapter 6.
WARNING.
HAND INJURY HAZARD
Do not place hands or fingers in Platform front handles when the front panel is open. Drop-
ping front panel while hand or fingers are inside either handle can cause serious injury.
WARNING.
PARTS INTEGRITY
Tampering or unauthorized substitution of components may adversely affect safety of this
product. Use only factory documented components for repair.
CAUTION.
STATIC-SENSITIVE COMPONENTS
Circuit boards in this instrument are static-sensitive. Take all static precautions when han-
dling them.
NOTE
If this Platform is stored in an environment whose ambient temperature is below 5°C (41°F), it
must be moved into a room temperature environment for 24 hours prior to powering up. If
not, moisture may form inside the LCD display.