Instruction manual

Instruction Manual
760006-A
September 2001
11-8 Appendices Rosemount Analytical Inc. A Division of Emerson Process Management
Model NGA 2000 Platform
powered when in non-alarm mode,
which means that it generates an
alarm signal when the power goes
off, or when the software is reset.
All alarms other than concentration
alarms are automatically in fail-safe
mode.
12. Return to the Analog output module
setup menu.
13. Select Alarm conditions...
14. Choose the operation of each relay.
If you have selected any concentra-
tion alarms, go back one menu and
select Concentration alarm parame-
ters…
15. Select the appropriate relay whose
parameters to set.
16. Set parameters as desired
17. Press HOME (F1) to leave the I/O
Module setup.
IO module ID: