Instruction manual

Instruction Manual
760006-A
September 2001
Rosemount Analytical Inc. A Division of Emerson Process Management System SIO Module 4-3
Model NGA 2000 Platform
4-2 SETUP
The SIO board contains analog outputs (2 to
8), a serial interface (RS232 or RS485), and
three relay outputs. If the SIO board is in-
stalled in the Analyzer, the line “Module in-
stalled:” must be set to “Yes.”
Figure 4-2. System SIO Module Setup
Using the ↑ ↓ cursor keys, select a line.
Select the variable or change to the sub
menu with the ↵ or ← cursor keys.
Select the variable parameter with the ↑ ↓
cursor keys.
Confirm the new value with the Enter (↵ )
cursor key or cancel and return to the last
value with the Back… (F4) key.
CLD
7.50
Measure
Back…
-- System SIO Module --
Analog output setup…
Serial interface setup…
Relay outputs setup…
Module installed: Yes
Main Menu
↓
Analyzer and I/O, expert controls and setup…
↓
System SIO Module…
↓