Instruction manual

ManualsBrandsEmerson ManualsFitness EquipmentROSEMOUNT NGA2000 HFID

Instruction Manual

760006-A

September 2001

Rosemount Analytical Inc. A Division of Emerson Process Management System SIO Module 4-7

Model NGA 2000 Platform

Setting output current

The options are 0…20 mA or 4…20 mA

which also sets the voltage outputs to 0-

10V and 2-10V respectively.

Figure 4-8. SIO Analog Output Setup – Setting Output Current

Hold output during calibration

Enable this option to hold the analog out-

put to the last value before calibration for

the entire calibration sequence including

any purge and dwell time. This setting is

valid for all kinds of calibrations of an

Analyzer module: manual, timed, system,

or AK controlled.

Figure 4-9. SIO Analog Output Setup – Set Hold Output During Calibration

CLD 7.50 ppm

Measure

Back…

-- Analo

Output Setup --

Output number: 1

Choose signal source mdoule…

Choose signal…

Signal value for 0% output: 400.00

Signal value for 100% output: 700.00

Output current: 0…20 mA

Hold output during calibration: No

Signal name: Sample flow

Current signal value: 8.60

Source module: CLD: 1.0

More…

Move the cursor to Output current:, and

adjust the value to the desired output.

Move the cursor to Hold output during

calibration: and select Yes to enable, No to

disable.