Instruction manual

Instruction Manual
760006-A
September 2001
Rosemount Analytical Inc. A Division of Emerson Process Management System DIO Module 5-5
Model NGA 2000 Platform
Figure 5-3. System DIO Module – Configure Inputs (continued from previous page)
CLD 7.50 ppm
Measure
<<< Back… >>>
-- Functions --
AM: Zero-Cal
AM: Span-Cal
AM: Range-1
AM: Range-1
AM: Range-1
AM: Range-1
SYS: Zero-Cal
SYS: Zero/Span-Cal
CLD
Measure
Back…
-- DIO Module Inputs --
7.50 ppm
Input number: 1
Choose module…
Choose function…
Sort ID: 1
Signal name: ???
Signal level: 000.0
Signal comes from: CLD
Next…
Back in the DIO Module Inputs menu, use
the ↑ ↓ cursor keys to go to Choose
Function… menu line, press ↵ (Enter).
In the Functions menu, select the desired
signal for the digital output number (1-24)
being configured. If available, press ↵
(Enter) for additional signals.
(The list of signals will depend on the
Analyzer module.)