Instruction manual

Instruction Manual
760006-A
September 2001
6-8 System Configuration and Diagnostics Rosemount Analytical Inc. A Division of Emerson Process Management
Model NGA 2000 Platform
6-7 SECURITY CODES
This menu is used to set the security codes
for the three levels of security. The default
PIN codes are: Basic level 12345, Expert
level 54321 and System level 12345.
If a security code is lost or forgotten,
there is no possibility of entering
the locked security level.
Figure 6-7. Setting Security Codes
From the System Configuration and
Diagnostics menu, use the ↑ ↓ keys to
move to the Security codes… menu line
and press the ↵ (Enter) key.
In the Security Codes menu, use the ↑ ↓
keys to move to the desired security code
line and press the ↵ (Enter) key to set the
PIN number for that line.
Use the function keys F1 to F5 to enter the
numerical security code in the desired se-
quence. The numbers will appear in the “Ac-
tual PIN” line as they are entered. The
characters displayed on the function keys
cannot be entered as code numbers. Press
the ← key to return to the Security Codes
menu.
CLD 7.50 ppm
-- S
y
stem Confi
g
uration and Dia
g
nostics --
System calibration…
Diagnostic menus…
Load/Save configuration (CMMCA)…
Date and time…
Security codes…
Network module management…
System reset…
Pump 1: Off
Pump 2: Off
System tag: Fisher-Rosemount
Measure
Back…
Channel
CLD 7.50 ppm
-- Securit
y
Codes --
Basic level security: Disabled
Expert level security: Disabled
System level security: Disabled
Define basic level security PIN…
Define expert level security PIN…
Define system level security PIN…
Measure
Back…
CLD 7.50 ppm
-- Define Basic Level Securit
y
PIN --
Press five softkeys in any order to define the PIN
The actual PIN is represented by the order in which they are
pressed, and shown numerically below.
Press the left arrow key when you are done.
Actual PIN: 12345
ABCDE1
PQRST4
FGHIJ2 KLMNO3 UVWXYZ5
Main Menu
↓
System configuration and diagnostics…