Instruction manual

Instruction Manual
760006-A
September 2001
6-10 System Configuration and Diagnostics Rosemount Analytical Inc. A Division of Emerson Process Management
Model NGA 2000 Platform
6-8 NETWORK MODULE MANAGEMENT
This menu is used to view the currently con-
figured network of modules and to bind, re-
move and replace modules.
List of active modules…
Figure 6-8. Network Module Management – List of Active Modules
From the System Configuration and
Diagnostics menu, use the ↑ ↓ keys to go
to the Network module management…
line and press the ↵ (Enter) key
Using the ↑ ↓ keys move the cursor to the
List of active modules… line and press
the ↵ (Enter) key.
The List of Active Modules screen displays
the list of currently active modules
connected to the Platform. Use the <<<
and >>> keys to scroll through additional
screens.
Highlight a listed module, press the ↵
(Enter) key the display will be the Basic
controls menu for that Analyzer module.
Highlight the control module (Platform),
press the ↵ (Enter) key, the display will be
the Main menu.
CLD 7.50 ppm
-- Network Module Mana
g
ement --
List of active modules…
Memory usage…
Automatic bind of I/O-modules: Yes
Bind modules…
Erase inactive modules…
Replace modules…
Note: Re-initializing will destroy all the binds.
Re-initialize network!
Measure
Back…
CLD 7.50 ppm
-- List of Active Modules --
Control module: 0.0
CLD: 1.0
Measure
Back… >>><<<
CLD 7.50 ppm
-- S
y
stem Confi
g
uration and Dia
g
nostics --
System calibration…
Diagnostic menus…
Load/Save configuration (CMMCA)…
Date and time…
Security codes…
Network module management…
System reset…
Pump 1: Off
Pump 2: Off
System tag: Fisher-Rosemount
Measure
Back…
Channel
Main Menu
↓
System configuration and diagnostics…