Instruction manual

Instruction Manual
760006-A
September 2001
Rosemount Analytical Inc. A Division of Emerson Process Management System Configuration and Diagnostics 6-13
Model NGA 2000 Platform
Bind Modules
Figure 6-10. Network Module Management – Bind Modules
In the Network Module Management menu,
use the ↑ ↓ keys to go to Bind modules…
line and press the ↵ (Enter) key.
The Module Binding screen displays the list
of one or more installed Analyzers. The list
may show I/O modules already bound to
Analyzers.
To add an I/O module to an Analyzer mod-
ule, highlight the desired Analyzer module
and press the Add! (F2) key to display the
Select I/O Modules screen which lists avail-
able I/O modules.
Use the <<< and >>> keys to scroll through
additional screens.
Highlight a listed I/O module, press the ↵
(Enter) key, the display will return to the
Module Binding screen.
The selected I/O module will be indented
below the Analyzer module.
CLD 7.50 ppm
-- Network Module Mana
g
ement --
Measure
Back…
List of active modules…
Memory usage…
Automatic bind of I/O-modules: Yes
Bind modules…
Erase inactive modules…
Replace modules…
Note: Re-initializing will destroy all the binds.
Re-initialize network!
CLD 7.50 ppm
-- Module Bindin
g
--
Abort
Delete!
CLD1 CLD: 1.0
Bind!Add!
CLD 7.50 ppm
-- Select I/O Modules --
Measure
Back…
Select the modules you wish to bind to the current
analyzer.
Analog I/O
Autocal I/O
>>><<<
CLD 7.50 ppm
-- Module Bindin
g
--
Abort
Delete!
CLD1 CLD: 1.0
Analog I/O
Bind!Add!
Main Menu
↓
System configuration and diagnostics…
↓
Network module management…