Instruction manual

Instruction Manual
760006-A
September 2001
6-14 System Configuration and Diagnostics Rosemount Analytical Inc. A Division of Emerson Process Management
Model NGA 2000 Platform
Erase Inactive Modules
This function allows a module no longer
attached to the platform but still in mem-
ory to be removed from the binding.
Figure 6-11. Network Module Management – Erase Inactive Modules
In the Network Module Management menu,
use the ↑ ↓ keys to go to Erase inactive
modules… line and press the ↵ (Enter) key.
The Erase Inactive Module screen is dis-
played. Use the ↑ ↓ keys to go to Choose
module… line and press the ↵ (Enter) key.
The list of modules will be displayed. Use
the ↑ ↓ keys to highlight the module to be
erased, press the ↵ (Enter) key.
The display will return to the Erase Inactive
Module menu with the selected module to be
erased displayed below the line. Press the
Erase! (F3) key to remove binding.
CLD 7.50 ppm
-- Network Module Mana
g
ement --
Measure
Back…
List of active modules…
Memory usage…
Automatic bind of I/O-modules: Yes
Bind modules…
Erase inactive modules…
Replace modules…
Note: Re-initializing will destroy all the binds.
Re-initialize network!
CLD 7.50 ppm
-- Erase Inactive Module
Abort
Erase!
Choose module…
Choosen module: ???
Bind!
Main Menu
↓
System configuration and diagnostics…
↓
Network module management…