Instruction manual
Instruction Manual
760006-A
September 2001
Rosemount Analytical Inc. A Division of Emerson Process Management System Configuration and Diagnostics 6-15
Model NGA 2000 Platform
Replace Modules
This function allows a module to be re-
placed by another module.
Figure 6-12. Network Module Management – Replace Modules
In the Network Module Management menu,
use the ↑ ↓ keys to go to Replace
modules… line and press the ↵ (Enter) key.
The Replace Modules screen is displayed.
Use the ↑ ↓ keys to go to Choose old mod-
ule… line and press the ↵ (Enter) key.
The list of modules will be displayed. Use the
↑ ↓ keys to highlight the module to be re-
moved, press the ↵ (Enter) key.
The display will return to the Replace Mod-
ules menu with the selected module to be
replaced displayed below the line.
Use the ↑ ↓ keys to go to Choose new
module… line and press the ↵ (Enter) key.
The list of modules will be displayed. Use the
↑ ↓ keys to highlight the module to be added,
press the ↵ (Enter) key.
The display will return to the Replace Mod-
ules menu with the selected module to be
added displayed below the line.
Press the Replace! (F3) key to change the
binding.
CLD 7.50 ppm
-- Network Module Mana
g
ement --
Measure
Back…
List of active modules…
Memory usage…
Automatic bind of I/O-modules: Yes
Bind modules…
Erase inactive modules…
Replace modules…
Note: Re-initializing will destroy all the binds.
Re-initialize network!
CLD 7.50 ppm
-- Re
p
lace Modules --
Abort
Replace!
Choose old module…
Choose new module…
Result of last replace operation: ???
Chosen new module: ???
Chosen old module: ???
Bind!
Main Menu
↓
System configuration and diagnostics…
↓
Network module management…