Instruction manual

Instruction Manual
760006-A
September 2001
Rosemount Analytical Inc. A Division of Emerson Process Management System Configuration and Diagnostics 6-17
Model NGA 2000 Platform
6-11 SYSTEM RESET
Resets the Analyzers to the initializing mode
which is the same as switching the power off
and then on.
Figure 6-14. System Reset
In the System Configuration and
Diagnostics menu, use the ↑ ↓ keys to go to
System reset… line and press the ↵ (Enter)
key.
The System Reset menu screen is dis-
played. Use the ↑ ↓ keys to go to System
reset! line and press the ↵ (Enter) key.
CLD 7.50 ppm
-- S
y
stem Reset --
Abort
Are you sure???
System reset!
Bind!
CLD 7.50 ppm
-- S
y
stem Confi
g
uration and Dia
g
nostics --
System calibration…
Diagnostic menus…
Load/Save configuration (CMMCA)…
Date and time…
Security codes…
Network module management…
System reset…
Pump 1: Off
Pump 2: Off
System tag: Fisher-Rosemount
Measure
Back…
Channel
Main Menu
↓
System configuration and diagnostics…