Instruction manual
Instruction Manual
760006-A
September 2001
6-18 System Configuration and Diagnostics Rosemount Analytical Inc. A Division of Emerson Process Management
Model NGA 2000 Platform
6-12 DIAGNOSTICS
This menu has two submenus (Control mod-
ule diagnostics… and Analyzer module diag-
nostics…) for viewing and resetting any
software errors. (For Analyzer module diag-
nostics, refer to applicable Analyzer module
instruction manual.)
Figure 6-15. Accessing Diagnostics Menu
From the Main Menu, using the ↑ ↓ keys
move the cursor to the System
configuration and diagnostics… line and
press the ↵ (Enter) key.
Using the ↑ ↓ keys move the cursor to the
System Diagnostics menus… line and
press the ↵ (Enter) key.
Using the ↑ ↓ keys move the cursor to the
Control module diagnostics… line and
press the ↵ (Enter) key.
For Analyzer module diagnostics see the
applicable Analyzer module manual.
CLD 7.50 ppm
Measure
Status… Channel Lock… MFG Data
-- Main Menu --
Analyzer basic controls (calibration) & setup…
Analyzer and I/O, expert controls & setup…
System configuration and diagnostics…
Display controls…
CLD 7.50 ppm
-- S
y
stem Confi
g
uration and Dia
g
nostics --
Measure
Back…
Channel
System calibration…
Diagnostic menus…
Load/Save configuration (CMMCA)…
Date and time…
Security codes…
Network module management…
System reset…
Pump 1: Off
Pump 2: Off
System tag: Fisher-Rosemount
CLD 7.50 ppm
-- Dia
g
nostics Menus --
Control module diagnostics…
Analyzer module Diagnostics…
Measure
Back…
<<<l
>>>
Time & Date: 10:30:05 August 10 2001
System tag: Fisher-Rosemount