Instruction manual

Instruction Manual
760006-A
September 2001
Rosemount Analytical Inc. A Division of Emerson Process Management System Configuration and Diagnostics 6-19
Model NGA 2000 Platform
a. Platform
This menu provides access for viewing and
resetting any software errors that may have
occurred in the Platform. This would be used
to report any such errors to Rosemount serv-
ice personnel.
Figure 6-16. Platform Diagnostics Menu
From the System Configuration and
Diagnostics menu, use the ↑ ↓ keys to move
Diagnostic menus… line, press ↵ (Enter).
From the Diagnostics Menus use the ↑ ↓
keys to move Control module
diagnostics… line, press ↵ (Enter).
After initialization, the error message should
show “No_Error”. The Edit to reset: line will
show “Report”.
To reset any errors, use the ↑ ↓ keys to
move to the Edit to reset: line, press ↵
(Enter) and change “Report” to “Reset”,
press ↵ (Enter) again.
The Reset (F5) key is to re-initialize the
Platform and all attached Analyzer modules.
See Section .
Main Menu
↓
System configuration and diagnostics…
↓
Diagnostic menus…
CLD 7.50 ppm
-- Dia
g
nostics Menus --
Control module diagnostics…
Analyzer module Diagnostics…
Measure
Back…
<<<l
>>>
CLD 7.50 ppm
-- Control Module Dia
g
nostics --
Software error code (1 = no error) 1
Last software error message: No_Error
And: No_Error
And: No_Error
And: No_Error
And: No_Error
And: No_Error
And: No_Error
And: No_Error
Edit to reset: Report
Measure
Back…
Reset
CLD 7.50 ppm
-- S
y
stem Confi
g
uration and Dia
g
nostics --
Measure
Back…
Channel
System calibration…
Diagnostic menus…
Load/Save configuration (CMMCA)…
Date and time…
Security codes…
Network module management…
System reset…
Pump 1: Off
Pump 2: Off
System tag: Fisher-Rosemount