Owner Manual

13. Trouble Shooting
POSSIBLE CAUSE MEASURE
The plug of the appliance is not
connected to the socket.
Check the corresponding socket by
connecting it with another appliance.
The plug has become loose. Check the fuse box.
• The socket is not supplied with energy.
• The fuse is switched off.
• The voltage is too low.
Compare the data on the model plate with
the data of your energy supplier.
The door was frequently opened. Close the door properly.
The door is not properly closed. Do not overfill.
• The appliance is overfilled. The door seals
are damaged.
Replace the seal.
• Main control board is defective.
• PCB is defective.
• Plug is defective.
Contact the service.
• LED is defective.
• Temperature cannot be determined.
Contact the service.
The appliance is not installed on a
level, dry, solid floor.
Realign the appliance. Readjust
the appliance.
The appliance is in contact with a wall or
another item. The bottles are incorrectly
positioned.
Realign the bottles.
Some items have dropped behind
the appliance.
Remove these items.
The appliance is not installed on a
level, dry, solid floor.
Realign the appliance.
Door seal is defective. Replace the door seal.
Shelves are not inserted properly. Insert the shelves properly.
Control panel is defective. Contact the service.
23