Heritage Vent Free Cast Iron Stove Installation Manual
31208-1-1112Page 22
IP OPERATING INSTRUCTIONS
5.25 VDC ELECTRONIC CONTROL VALVE
the pilot from a standing pilot mode to an intermittent pilot mode.
IPI Mode - In the Intermittent Pilot mode, when the unit is
CPI Mode - In the Continuous Pilot mode, the pilot re-
OFF.
NOTICE
to switch from IPI (upward position) to the CPI (downward posi-
tion). See Figure 18.
When the unit is turned to ON, the electrical current will energize
1. Follow the SAFETY and LIGHTING INSTRUCTIONS for In-
found in the control compartment located in the lower cavity
of the appliance.
2. During the operating season (or in power outage periods), it is
recommended that the pilot remain in the CPI (standing pilot
3. The gas valve has inlet and outlet pressure taps as shown in
NOTICE:
-
OPTIONAL REMOTE CONTROLS
the ON/OFF switch wires from the white and green wire connec-
tors and connect the wires from the remote receiver to the green
and white wire connectors. See Figure 18.
Follow the instructions included with the remote control for pro-
gramming and other operational information.
Figure 18