Heritage Vent Free Cast Iron Stove Installation Manual
31208-1-1112 Page 39
ACCESSORY SIDE SHELVES INSTALLATION INSTRUCTIONS
1. Remove cast iron or stone inlay inserts from casting top and
carefully set them aside.
2. Remove cast iron top from stove and place upside down on a
iron top.
4. Place left and right side shelves in place shown in Figure 22.
7. Replace cast iron top on unit.
8. Attach side shelf supports one at a time, using two ¼-20 hex
9. Replace cast iron or stone inlay inserts into casting top.
NOTICE: Be sure to remove side shelf supports prior to removing
cast iron top to eliminate potential scratching or chipping to the
cast iron sides.
NOTICE: Due to inherent properties of the casting process,
shelves to the casting top. These shims are provided in the form
accessory side shelf angles upward, toward the ceiling, washer(s)
Figure 22
Figure 23
1. Remove left cast iron insert and right cast iron insert from casting
top.
2. Insert left stone inlay and right stone inlay into casting top.
3. Installation of stone inlay is completed.
OPTIONAL STONE INLAY INSTALLATION INSTRUCTIONS
Figure 24
Figure 25