Heritage Vent Free Cast Iron Stove Installation Manual
31208-1-1112 Page 43
CIB3-1 OPTIONAL BLOWER INSTALLATION INSTRUCTIONS
Fan Control
Cleaning
a year. If the air output decreases or the noise level increases, it
indicates a dirty wheel.
Blower Motor
Wiring
the National Electrical Code, ANSI/NFPA 70 or Canadian Electrical
Code, CSA C22.1, if an external electrical source is utilized. This
appliance is equipped with a three-prong [grounding] plug for
not cut or remove the grounding prong from this plug. For an
ungrounded receptacle, an adapter, which has two prongs and a
receptacle and its wire connected to the receptacle mounting screws.
With this wire completing the ground, the appliance cord plug can
Figure 29
CAUTION
Label all wires prior to disconnection when servicing controls.
Wiring errors can cause improper and dangerous operation.
WARNING
"OFF,"