MOVIE CUBE N160H DVB-T Set top box User Manual 1 Movie Cube N160H
Movie Cube N160H
TABLE OF CONTENTS SAFETY WARNINGS .......................................................................................................................................... 5 Preface ............................................................................................................................................................. 6 1. Main Features ..............................................................................................................................................
5. Option ........................................................................................................................................................ 20 6. System........................................................................................................................................................ 21 7. USB.............................................................................................................................................................
SAFETY WARNINGS CAUTIONS: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to "dangerous voltage" and to prevent from a risk of electric shock. Warning: To reduce the risk of electric shock, don't open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing).
PREFACE Thank you for purchasing the new N160H! Please read this manual thoroughly before any use and keep it well for future reference. It will help you keep abreast with many of the exciting features and contains important safe measurements and correct operational information, so please read all the information carefully in order to avoid any damage. 1.
BACK PANEL 1. RF signal input 2. RF signal output 3. Coaxial jack 4. HDMI 5.
2. REMOTE CONTROL MUTE POWER TV/R Disable Audio output Standby on/off Switch between TV program and Radio program when available INFO. Display the information bar REC Record the current program USB Direct access to your USB devices contents PVR Direct access to your recordings MENU Display main menu BACK Recall last channel FAV Display favorites channels EXIT Back to previous menu CH+/CHSelect next/previous channel. Directional arrows V-/V+ Decrease or increase the volume.
INSTALLATION GUIDE (1) Press [CH+/CH-] key to move the cursor. (2) Press [VOL+/VOL-] key to select the item. (3) Select [Channel Search] and press [OK] key to begin the auto scan. (4) Press [Exit] key to exit menu. As soon as the channel search ends, start enjoying your Movie Cube N160H watching your favorite DVB-T channels. To get more of your Movie Cube features, press [Menu] to access to Main Menu.
TV 1. TIMESHIFT FUNCTION This function is only available when you connect USB storage to the player. Press [Red] to start the timeshift, then press [Stop] to stop the recording.
2. RECORD FUNCTION If you press [REC] key to start recording, the screen will be displayed as below : Press [STOP] key to stop recording. 3. EPG RECORDING You will never miss your favorite program base on fully EPG recording feature. Press the [GREEN] button to access to the EPG. Press [OK] key to start EPG recording while you browse the EPG.
4. SCHEDULE YOUR RECORDING Press the [BLUE] button to access to the Timer. You can schedule your recordings by defining start and end time. You can add, edit and delete any scheduled recordings later on.
USB - MULTIMEDIA (1) Press [OK] key to enter the “Multimedia” menu. (2) Press [VOL-/VOL+] key to select “Music, Photo, Movie”. 1. MUSIC (1) Press [OK] key to enter the “Music” menu. (2) Press [CH-/CH+] key to select the file and press [OK] key to play the music. (3) Press [EXIT] key to return to folder. 2. PHOTO (1) Press [OK] key to enter the “Photo” menu. (2) Press [CH-/CH+] key to select the file and press [OK] key to show the picture. (3) Press [EXIT] key to return to folder. 3.
PVR – MANAGE YOUR RECORDINGS (1) Press [OK] key to enter the “PVR” menu. (2) Press [CH-/CH+] key to select the PVR file and press [OK] key to play the video. (3) Press [EXIT] key to return to folder. 1. FULL SCREEN (1) Press [CH-/CH+] key to choose the file to play. (2) Press [BLUE] key to make it full screen. 2. DELETE (1) Press [YELLOW] key to delete the selected program. (2) Confirm with [OK] key. 3. RENAME (1) Press [GREEN] key to rename the selected program. (2) Press [OK] key to save the changes.
CONFIGURE Press [CH-/CH+] key to select menu pages among Program, Picture, Channel Search, Time, Option, System and USB. 1. PROGRAM 1.1 PROGRAM EDIT Press [CH-] or [OK] key to enter the “Program Edit”. If Menu Lock is “On”, a dialogue inquires the password, which is “000000” for default.
When entering the “ALL TV” menu, which shows as below: (1) Press [CH+/CH-] key to move the cursor. (2) Press [PGDW/PGUP]key to execute the Page Up/Page down function. (3) Press the color key to execute the corresponding functions in “ALL TV”. 1.2 MOVE (1) Press [CH+/CH-] key to move the cursor and press [RED] key to make a mark. There will be a “moving mark” in the right side of the selected channel as above. (2) Press [CH+/CH-] key to move the selected channel to the position that you want to place.
(4) After marking, press [Exit] key to go back to “ALL TV”: there will be a favorite mark beside the marked channel. 1.2.5 RENAME (1) In “ALL TV” menu, press [CH-/CH+] key to move the cursor and press [BACK] key to open the “Rename” window. (2) Use the numeric key on the remote control to set the TV name. 1.3 SORT (1) Press [CH+/CH-] key to move the cursor to “Sort” then press [VOL-/VOL+] key to change the three kinds of sorting type: by “LCN, “service name”, “ONID”.
3. CHANNEL SEARCH (1) Press [MENU] key to display the main menu. (2) Press [VOL-/VOL+] key to select the “Channel Search “program. (3) Press [Exit] key to go back to the main menu. AUTO SEARCH (1) Press [CH+/CH-] key to select “Auto Search”. (2) Press [OK] to enter the “Auto Search” menu and start scanning. (3) In the “Auto Search” menu, press [Exit] key to cancel the scanning.
MANUAL SEARCH (1) Press [CH+/CH-] key to select “Manual Search”. (2) Press [OK] to enter the “Manual Search” menu. (3) Press [VOL-/VOL+] key to select the country. (4) Press [VOL-/VOL+] key to power on/off the “Antenna Power”. (a) You can scan channel by adjusting the “Frequency Channel” number and press [OK] key to start scanning. (b) If you scan channels by Frequency (MHz), “Frequency” and “Bandwidth” are available to adjust. Press [OK] key to save your modifications and the scan will start.
TIME OFFSET Press [VOL-/VOL+] key to change “AUTO / MANUAL“ type of time offset. COUNTRY REGION Press [VOL-/VOL+] key to change the country region. TIME ZONE When the time offset is “MANUAL“, you can change “GMT+0” value. SLEEP The player will automatically turn off after the number of hours indicated DAYLIGHT TIME Press Left/Right key to turn on or turn off Daylight saving POWER DOWN AFTER Press [VOL-/VOL+] key to setup when to power down automatically 5.
TRANSPARENT Increase or decrease the menu transparency to see the TV channels running in the background. 6. SYSTEM (1) Press [MENU] key to display the main menu. (2) Press [VOL-/VOL+] key to select the “System“ menu. PARENTAL GUIDANCE (1) Press [VOL-/VOL+] key to move the cursor and press [OK] key to input the Password ”000000”. (2) This sets the program parental controlling level.
SET PASSWORD (1) Press [VOL-/VOL+] key to move the cursor and press [OK] key to enter the password settings sub-menu. (2) Use the numeric keys of the remote control to set the new password. RESTORE FACTORY DEFAULT (1) Press [OK] key to enter the sub menu and then [OK] to confirm to restore the default. (2) Press [EXIT] key to cancel the restoring. INFORMATION Press [OK] key to show the system information (model no., SW version, HW version).
7. USB The USB menu will be disabled when the USB device is unplugged. The media player list will not be saved after unplugging the USB device, or in standby or power off mode. (1) Press [MENU] key to display the main menu. (2) Press [VOL-/VOL+] key to select the “USB“ menu. PHOTO SET UP (1) Press [CH-/CH+] key to move the cursor and press [OK] enter the “Photo configure” menu. (2) Press [CH-/CH+] and [VOL-/VOL+] key to adjust the slide time.
MOVIE SET UP (1) Press [CH-/CH+] key to move the cursor and press [OK] to enter the “Movie configure” menu. (2) Press [CH-/CH+] and [VOL-/VOL+] key to adjust the aspect ratio. PVR SET UP Press [CH-/CH+] key to move the cursor and press [OK] key to enter the “PVR Configure” menu. Recording device (1) Press [CH-/CH+] key to move the cursor and press [OK] key to enter the “Record Device” menu. (2) Then press [VOL-/VOL+] key to choose the DISK. (3) Press [EXIT] key to return to sub-menu.
Format (1) Press [CH-/CH+] key to move the cursor and (2) Press [OK] key to enter the “Format” then (3) Press [VOL-/VOL+] key to choose the Format (4) Press [Exit] key to return sub-menu.
TROUBLESHOOTING If you encounter problems when using this product, please check the following points before requesting service. Problem No power on Buttons do not work The player does not respond to the remote control No picture on screen No sound or distorted sound Solution Confirm that you have an appropriate power source. Check if all the connections between the wall outlet and power supply, and the power supply and the player are correct.