User manual

22
Movie Cube N160H
SET PASSWORD
(1) Press [VOL-/VOL+] key to move the cursor and press [OK] key to enter the password settings sub-menu.
(2) Use the numeric keys of the remote control to set the new password.
RESTORE FACTORY DEFAULT
(1) Press [OK] key to enter the sub menu and then [OK] to confirm to restore the default.
(2) Press [EXIT] key to cancel the restoring.
INFORMATION
Press [OK] key to show the system information (model no., SW version, HW version).
FIRMWARE UPGRADE
You will need a USB flash drive to upgrade the player.
(1) Copy the new firmware to the root directory of a USB flash drive and connect it to the USB HOST port of the
player.
(2) Input password “666666” on the main menu, the system will update the firmware automatically.
(3) Please restart the Movie Cube N160H after the software upgrade is complete.