Installation Guide

Toilet Paper Holder - Installation Instructions

Mark three hole locations for the

mounting plate.

Slip trim plate over the threaded stud on the

mounting plate. Thread TP Holder onto the

threaded stud until tight against trim plate.

Shape of trim

plate varies

depending on

style.

Use a screw driver to install three Screw Anchors into the wall.

Install mounting plate on top of the Screw Anchors. Attach

with sheet metal screws provided.

Tighten set screw at base of post with allen

wrench provided. Holder may be mounted

vertically or horizontally.

IN4-TOLPAPHRBAR REV. 11/16/04

Screw

Anchors

Installed Screw

Anchors

PAGE 1
Toilet Paper Holder - Installation Instructions 1 Mark three hole locations for the mounting plate. 2 Use a screw driver to install three Screw Anchors into the wall. Install mounting plate on top of the Screw Anchors. Attach with sheet metal screws provided. Screw Anchors 3 Slip trim plate over the threaded stud on the mounting plate. Thread TP Holder onto the threaded stud until tight against trim plate. 4 Installed Screw Anchors Tighten set screw at base of post with allen wrench provided.