Installation Guide

2-1/8" Dia.

Bores

1" Dia.

Edge Bores

2-1/4"

1/8"

Deep

2-3/8"

2-3/4"

5-1/2"*

2-1/4"

Installation Instructions-Tubular Monolithic Entry Set - Double Cylinder Deadbolt

Door Prep - Active Lock

Outside Trim

IN4-ENTSETDLMON REV. 03.28.08

Inside Trim

Plates and grip vary depending on style.

3/16”

Deep

2-3/4”

1-1/8”

1-1/4”

1/8”

Deep

Tailpiece Horizontal

After lock has been installed

tighten set screw with allen

wrench.

Door Jamb for Active Locks

Optional Collar

For Brass Only

Optional Collar

For Brass Only

*Marietta-6 locks have 6” center bore spacing.

PAGE 1
Installation Instructions-Tubular Monolithic Entry Set - Double Cylinder Deadbolt Door Jamb for Active Locks Door Prep - Active Lock 3/16” Deep 2-3/8" or 2-3/4" 1" Dia. Edge Bores 2-1/4" 1/8" Deep 2-3/4” 5-1/2"* 1/8” Deep 1-1/8” 2-1/4" 2-1/8" Dia. Bores 1" 1-1/4” *Marietta-6 locks have 6” center bore spacing. Outside Trim Inside Trim Tailpiece Horizontal Optional Collar For Brass Only Optional Collar For Brass Only After lock has been installed tighten set screw with allen wrench.