Installation Guide

Dummy
Door Prep. Active
Optional Thru Bolts
Latch
Align Plates
Installation Guide— Non-Keyed Plates : Knob
Rev. 11/17/07
IN4-NKEYPLTSKNB
Mount Plates
Thru bolts (provided) may be used
on hollow doors instead of wood
screws (also provided).
Edge Guide
Provided
2-3/8"
or
2-3/4"
1/8"
Deep
2-1/4"
1"
1" Dia.
Edge Bore
2-1/8" Dia.
Bore
Align sideplates using edge guide.
Drill pilot holes, install wood screws or
thru bolts as required (both types are
provided).
After lock has been installed
tighten set screw with allen
wrench.
After lock has been installed
tighten set screw with allen
wrench.
IMPORTANT: Knob location on the sideplate (top, middle, or bottom) varies depending on style. Determine proper orientation before drilling holes.