Installation & Assembly

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

4 – 3/8” x ½” Button Head Screw

6 – 2 1/2” Lag Screw

1 – 7/32” Allen Wrench

Components included:

1 – Oval Base

2 – Hanging Brackets

12 – Angled Pot Hooks

If you have also purchased a grid (may be sold and packaged separately) you will also have received:

1 – Grid

6 – Straight Pot Hooks

6 – Grid Brackets

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate in

quality, design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100  Fax 360-385-6156

www.enclume.com

12-LOW CEILING OVAL RACK

PAGE 1
PR12-LOW CEILING OVAL RACK Thank you for choosing Enclume! Enclume racks are the ultimate in quality, design, strength and function. WARNING: READ ALL OF THE INSTRUCTIONS BEFORE ASSEMBLING AND USING YOUR RACK If you need help, please call 1-877-ENCLUME Enclume Design Products 24 Colwell Street, Port Hadlock, WA 98339 Phone 360-385-6100  Fax 360-385-6156 www.enclume.com Enclosed you will find everything needed for the assembly and use of your storage rack. Two people make assembly and installation easier.
PAGE 2
ASSEMBLY AND INSTALLATION INSTRUCTIONS Rack Assembly 1) If your rack is plated, it is best to keep the tissue on during installation to avoid fingerprinting. 2) Using the four button head screws and the Allen wrench, attach the two hanging brackets to the outside of the oval base and tighten securely. The assembly is now complete. 3) Your rack must be anchored into solid wood of ceiling joists or beams. Plasterboard or wall fasteners will not work and should not be used.